(Genuine Honda) .010 thick.

(Genuine Honda) .010 thick.

Stock Replacement for all 6.5 Chinese OHVs. Metal, .010 Thick
Note: Does not fit Predators.

Stock Replacement for 212 Predators

Stock Replacement for all 6.5 Chinese OHVs. Fiber with metal Sealing ring, .045 Thick
Note: Does not fit Predators.

(Genuine Honda)
.045 thick. Will not fit UT2 Engines.

(Genuine Honda)

(Genuine Honda)
Fits GX200 & UT2 GX160s, Approx .010 thick

Fiber Gasket with Steel ring, Approx .045 thick. Will fit up to 2.798 bore.
Fits Honda, Chinese OHV, and new style Predator blocks. Will work on old style Predators if one bolt hole is enlarged.
Recommended for HP application. Seals better than copper gasket.

Fiber Gasket with Steel ring, Approx .045 thick. OEM GX160 Gasket. Fits GX160, 200s, and 6.5 Chinese OHVs

Head Gasket to fit 90 to 92mm Bores, .020 MLS type

Fiber Gasket to fit 90 to 92mm. Bores, .045"

Copper Coat is a high temperature, high quality aerosol metallic sealer used with copper head gaskets. Size/Net Weight 9 Wt Oz, Copper, Aerosol Can, Copper Liquid, Flash Point (F) -20, 0.74 Specific Gravity, VOC Content 399,

Cannot be shipped by Air, Ground Shipping Only

Copper Head Gaskets

Select for the following sizes:
68 mm (2.682" pistons, GX200s & 6.5 OHV)
70mm (2.756" pistons, 212 Predators)
72mm (2.815" pistons)
73mm (2.87" pistons)
76mm (2.992"+ pistons)

All sizes available in .016" Thick or .032" Thick

Fiber Gasket to fit 90mm Bores, .045"

Excellent Sealing. Can remove layers to make thinner. Available in .018", .027", .036"
(72mm not available in .036")

Fits 212 Predators and GX200s/6.5 Chinese OHVs with 2.815 Bores.

(Genuine Honda) .045"

(Genuine Honda)
.045 Thick. Replaces 12251-ZF6-W01

Available in .018 or .032"

(Sealer Recommended.)

Available in .018 or .032"

(Sealer Recommended)

(Genuine Honda)

GX120 Head Gasket .038 to .040

GX120 Head Gasket .041 to .042. QMA legal

Best sealing of all the head gaskets we sell
Fits 212 Predators and GX200s/6.5 Chinese OHVs with 3.0" Bores.

GX160 Head Gasket .038 to .040

Note: Not legal for QMA/USAC

GX160 Head Gasket .041 to .042. QMA & ASN legal