Pulls hard from 2000-6500rpm.

This Rattlesnake ground and hardened cam provides significant power improvements over a stock cam. Works best with mild motors using bored OEM or small aftermarket carbs. This cam is a bolt-in type and does not require block modifications, yet keeps close to stock base circle to maintain correct valve train geometry. 22lb springs must be used. Cam is not welded and will not work with 26lb, 37lb, or dual springs.

• 230 Duration
• 251” Lift
• ICL 106
• LS 111
• Valve Lash (Hot) .002 I, .003 E

WARNING: To prevent premature cam wear, use assembly lube during installation. Run motor on stand at 2000rpm for 20 minutes, using stock (11 or 12lb) springs with no load.

*We recommend only Mobil 1, Royal Purple, or Redline 0W20, 5W20, or 0W30 oil.