Heavy Duty Chrome Moly Pushrods
Must be cut to length. Includes tube and end tip.
Considerably stiffer than stock. Use with all HD springs. Capable of 10,000+ RPM
ALL PUSHRODS ARE SOLD INDIVIDUALLY. YOU MUST HAVE 2 PER MOTOR.
The following are recommendations only and may not work for all applications. See notes regarding pushrod length:
GX240/GX270s
5.720" Stock Length: Use with Stamped Rocker Arms
5.620" (-.100): Use with Billet & Roller Rocker Arms
GX340/GX390, 13/15hp Clones, & 420 Predator OHV (Non-Hemi)
6.540" Stock Length: Use with Stamped Rocker Arms
6.440" (-.100): Use with Billet & Roller Rocker Arms
420 Hemi Predators
7.000" Stock Length: Use with Stamped Rocker Arms
6.900" (-.100): Use with Billet & Roller Rocker Arms
*Note: Due to differences in cam base circles, deck heights, head milling, gasket thickness, etc. actual pushrod length can vary. Pushrods are sold for the experienced engine builder. We recommend you assemble the motor first and then determine correct pushrod length. One of the best ways is to grind a stock pushrod until you get the correct geometry, measure it, and then order one closest to that size.
*Depending on availability, pushrods may be black anodized or uncoated.
