Home > Engines >

Engine, Racing, Honda GX200, Limited Mod
Engine, Racing, Honda GX200, Limited Mod


 
Our Price: $993.00

Stock Status:(Out of Stock)

Part #: ENG-RAC-GX200-LM

Select Piston/Rings

Honda Flat-Top Piston [+$6.4]
OEM Dished Piston
Wiseco 2.675 3-Ring Piston & Long Rod [+$133]
Wiseco 2.675 2-Ring Piston & Long Rod [+$108]
Honda UT2 Flat-Top & 3.403 Long Rod (Hot Setup!) [+$50]
Wiseco 2.756 2-Ring Piston & Long Rod [+$247]
Wiseco 2.756 3-Ring Piston & Long Rod (Recommended) [+$253]
Select Output Shaft or Gearbox

3/4" Shaft (Standard)
2 to 1 Gear Box (Wet Clutch) [+$237]
Select Carburator

GX200 Bored - Gas
22mm Mikuni - Gas [+$19.1]
SA Extreme Carb - Gas [+$24.6]
28mm Flat Slide Mikuni - Methanol [+$143]
SA Extreme Carb- Methanol [+$28.4]
28mm Black Round Slide - Gas [+$55]
Select Compression Ratio

10.5 to 1
Valve Size

28mm Intake, 25mm Exhaust, Stainless [+$42]
Select Camshaft

252-0207 (Very Small Oval, 6500 RPM)
274-0207 (Small Oval, 7500 RPM)
252-0611
274-0607 (Large Oval, 8000+ RPM)
280-0611 (Snow Mobiles & Mini Bikes)
Select Flywheel

Stock Flywheel
Dyno PVL (Cast) Aluminum Flywheel [+$77]
ARC Billet Aluminum Flywheel - 6619 [+$108]
Super Light (ARC) Aluminum Flywheel [+$128]
ARC 6607 (Awesome Acceleration!) [+$175]
Add Fuel Tank & Pump Options

None
Add Small Style Tank with Short Cap (Mini Bike) [+$30.6]
Additional Options

Add Billet Side Cover [+$142]

Extended Starter Nut for Handheld Starter (No Recoil) [+$23.1]

Qty:
Description -
 
Honda GX200 Limited Mod Racing Engine

Motor Includes:
  • Full Ported Head
  • Stainless Steel Valves
  • Oversized Intake (27mm)
  • Aluminum Retainers and Split Keepers
  • Billet Rod (Long Rod Available)
  • Stud Kit
  • HD Valve Springs (Lb-Based on Cam Selected)
  • Billet Rocker Arms
  • Chrome Moly Pushrods
  • Billet Guide Plate
  • Race-Prepped Block
  • 252 or 274 Cam
  • Choice of Carb
  • Timing Key
  • Air Filter
  • Compression Ratios up to 12.5 to 1
  • Dyno Tested (Note: Methanol Motors Will Be Dyno’d on Gas)
  • 16-20+ HP, Depending on Carb and Cam (25-35 HP on the Other Guy’s Dyno)
*All race engine orders may take up to 4-6 weeks before shipping.

*Note:
Unless stated otherwise, engines do not come with tank, muffler/exhaust, or linkage. Picture is for reference only (fuel pump and mounting plate not included unless specified). Filter should be sprayed with a K&N type oil, especially in dirt applications. Oil not included - click here. All motors are dyno-tested on gas. Methanol motors will be tested using equivalent gas-sized carb. All carbs are set for 900ft elevation and ambient temperature. Depending on elevation or weather, carb may need to be re-jetted.

*We offer $10 off shipping costs for each engine if purchasing 3 or more.
If shipping cost exceeds $130 in shopping cart, contact us for alternative freight methods. We can typically ship a pallet of engines for $150-$200, depending on delivery location.

WARNING: TO PREVENT SERIOUS INJURY, AN ALUMINUM FLYWHEEL SHOULD BE USED ON ALL MODIFIED MOTORS. MOTORS SOLD FOR ORGANIZED COMPETITION PURPOSES OR EXPORT ONLY. (NOT FOR USE ON ANY EQUIPMENT, OFF-ROAD, RECREATIONAL, OR EMISSIONS-CONTROLLED APPLICATIONS. DOING SO IS A VIOLATION OF FEDERAL LAW.)

Share your knowledge of this product. Be the first to write a review »