100% Brand new and high quality

Material: Stainless Steel

Operation Temperature: -80ƒ?Ÿ~+538ƒ?Ÿ

Feature: antioxidative, anticaustic, uviofast, high temperature resistant, cold resistant, high strength and easy to use.

Once you button up the cable ties, they can't be separated

Size: 300 x 4.6 x 0.25mm/ 11.8" x 0.18" x 0.01" (L*W*T)

PRICE IS FOR ONE WIRE TIE

Sold by the foot. Use Quantity to show how many feet you want to order.

• Protects From Extreme Heat
• Thermal And Abrasion Resistance
• Silicone Coated Fiberglass Fire Sleeving
• Continuous Protection To 1200 Degrees
• Short Term Protection Exposure To 2200 Degrees

Thermal sleeving capable of withstanding 1100 degree Fahrenheit continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield technology.

1" Diameter will expand to approx 1 3/4"

Fits up to 1 3/4" dia pipe.


Price is for one foot (also available in 10 ft rolls)

Sold by the foot. Use Quantity to show how many feet you want to order.

• Protects From Extreme Heat
• Thermal And Abrasion Resistance
• Silicone Coated Fiberglass Fire Sleeving
• Continuous Protection To 1200 Degrees
• Short Term Protection Exposure To 2200 Degrees

Protect your motor when storing and transporting (Color may vary).

The High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home. HT Silicone Coating is VOC (Volatile Organic Compounds) compliant in all 50 states.

Recommended for use with DEI non-Titanium exhaust wraps, HT Silicone Coating penetrates, seals and protects as well as helping to extend the lifespan of exhaust wrap.

• Heat protection up to 1500?øF
• Penetrates, seals, protects and prolongs the lifespan of exhaust wrap
• Protection from abrasions, hot oil spills & road grime
• Many uses around the home and shop
  
  Cannot be shipped by Air, Ground Shipping Only.

Wrapping headers and down pipes is an important first step in controlling unwanted underhood radiant heat. Keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density and increases exhaust flow. This improves exhaust scavenging resulting in cooler air intake temperatures for an improvement in performance and a gain in horsepower. ƒ?›Improves horsepower ƒ?›Withstands 1200F direct/2000F radiant ƒ?›Only exhaust wrap with installation guide lines ƒ?›Added durability and heat retention NOTE: Silicone Coating spray is highly recommended for glass fiber weap to penetrate, seal, protect and prolong the lifespan of exhaust wrap.


Wire ties not included - Order Seperate

Wrapping headers and down pipes is an important first step in controlling unwanted underhood radiant heat. Keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density and increases exhaust flow. This improves exhaust scavenging resulting in cooler air intake temperatures for an improvement in performance and a gain in horsepower.

ƒ?›Improves horsepower
ƒ?›Withstands 1200F direct/2000F radiant
ƒ?›Only exhaust wrap with installation guide lines
ƒ?›Added durability and heat retention

NOTE: Silicone Coating spray is highly recommended for glass fiber weap to penetrate, seal, protect and prolong the lifespan of exhaust wrap.


Wire ties not included - Order Seperate

This is a brand new roll of PREMIUM 1/16" x 2" x 50ft of BLACK header wrap. This is a first quality black wrap manufactured from high grade 100% fiberglass to withstand continuous high temperatures up to 1000 degrees Fahrenheit. Along with this top quality wrap you will receive six (6) stainless steel quick ties for use in securing the wrap in place after installation. The uses for this wrap are numerous. It's most popular use is to insulate header pipes and other engine components in auto racing. This wrap can reduce under-hood temperatures 50%-70%. It will also protect other under-hood components. This wrap is a 2" wide so you get much more coverage with less footage as compared to narrower wraps. Our wrap has a premium weave and is very easy to install. When installing, generally 1/4" overlap is recommended. Do not use this wrap if your engine leaks oil or other fluids. Do not use this as a heat trace insulator on leaky pipes.

�?�100% Fiberglass
�?�1000F rating
�?�Black
�?�1/16"thick x 2" wide NOTE: Silicone Coating spray is highly recommended for glass fiber weap to penetrate, seal, protect and prolong the lifespan of exhaust wrap.


Wire ties not included - Order Separate

Have you ever been burned by a header? Our header sleeve is manufactured from a patented material for maximum ""breathability"" and burn protection for the driver and pit crew. Because of its design, this new sleeve will not change the performance of your header pipe. With the new sleeve, header pipe temperatures are reduced by 500? closest to the driver. Carb temperatures are also reduced.

36" long. Fits up to 1 3/4" dia pipe.

Thermal sleeving capable of withstanding 1100 degree Fahrenheit continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield technology.

1" Diameter will expand to approx 1 3/4"

Fits up to 1 3/4" dia pipe.


Price is for 10ft roll