Fits: GX200, GX390, and All Chinese OHV's. Available in various thickness.

For use with Stock Pushrods

Used to raise stud when using (billet rockers) to get more height to correct valve train geometry.

For use with 1/4" Chrome Moly Pushrods

For use with Stock Pushrods

Genuine Honda For use with 3/16" Chrome Moly or Alumimum Pushrods

Aluminum Retainer for use with 30 & 37lb. Springs

(Sold each, keepers not included)

Replacement for valve kits.

Aluminum Retainer for use with 18 & 26lb Springs
(Sold each, keepers not included)

Aluminum Retainer for use with 30 & 37lb Springs
(Sold each, keepers not included)

For use with 3/16" Chrome Moly Pushrods

Retainer, Aluminum for use with split keepers, for use with HD/Dual Springs & SS Valves. 6.5mm Valve Stem.

Use only with Black HD retainers. Sold as a pair (2 keepers)

Aluminum Retainer for use with Dual Springs
(Sold each, keepers not included)

Use to increase spring pressure with aluminum retainers 5.5mm Stem (GX200, 6.5 Clones)


Sold as a pair (2 keepers)

Keepers, Replacement for Aluminum Retainers for 6.5mm Valves (GX270, GX390, and 13/15 hp Clones)

Sold as a pair (2 keepers)

Works only on Old Style Predators with 5.5mm stems.

(sold individually - 2 required per head)

Retainer, Aluminum for use with split keepers, for use with dual springs

RETAINERS ARE SOLD INDIVIDUALLY - 2 REQUIRED PER MOTOR

KEEPERS ARE NOT INCLUDED - ORDER SEPERATE

Use Keeper set part# DCS-55KEP (will not fit other keepers)

WARNING: These are the old style black retainers. These retainers while the strongest of the aluminum retainers may have guide to retainer interference. We recommend the use of our other Dual retainers,

For use with 1/4" Chrome Moly Pushrods

GX200, 6.5 Chinese OHVs, & 212 Predators using Stainless Valves (also GX120 & GX160s)

GX270 & GX390s using Stainless Valves

Seats for Big Valves, GX200, 390s, and all Chinese OHVs

Titanium Retainer for use with 37lb & Dual Springs
(Sold each, keepers not included)

Bronze Valve Guide for GX270 & GX390. 6.5mm Stem size. Must be reamed or honed to size, Each (sold individually - 2 required per head)

Retainer, Titanium for use with split keepers, for use with HD/Dual Springs & SS Valves. 6.5mm Valve Stem

RETAINERS ARE SOLD INDIVIDUALLY - 2 REQUIRED PER MOTOR

KEEPERS ARE NOT INCLUDED - ORDER SEPERATE

Use Keeper set part# MD016483

For use with 1/4" Chrome Moly or Alumimum Pushrods