|
|
|
|
|
|
|
|
|
|
|
NR RACING GIFT CARD! The best gift ever!
|
Must Drill Valve Cover to Install
|
Large Foam Pre-Filter, Fits Our Angled Filters
|
|
|
|
|
|
|
|
|
|
|
|
|
Valve Cover Gasket for New Style 212 Predator with Hemi Head
|
Fiber Head Gasket with Steel Ring, Approximately .045" Thick. Will Fit Up to 2.798" Bore. Fits Hondas, Chinese OHVs, and Predators.
|
Genuine Honda 18lb Valve Springs - Pair
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum Retainer for Use with Split Keepers, Stock Diameter Single Springs (18lb & 26lb), and Single Spring Valves
|
5.5mm Middle Groove Keepers, Pair. Replacement for Valve Kits.
|
Used to Adapt Mikuni Flat Slides to Manifolds. Use for 24/28mm.
|
|
|
|
|
|
|
|
|
|
|
|
|
Reusable Copper Exhaust Gasket. Fits GX120 to GX200s, 6.5 Chinese OHVs, & Predators.
|
Fits GX120 to GX200, 6.5 Chinese OHVs, and 212 Predators
|
Fits GX120 to GX200, 6.5 Chinese OHVs, and 212 Predators
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits GX120 to GX200, 6.5 Chinese OHV, and 212 Predator
|
7075 Aluminum Retainer for Use with Split Keepers, Large (37lb) or Dual Springs, and Stainless Steel Valves with 5.5mm Stems (GX200 or 6.5 Chinese OHV)
|
Offset Timing Key Used to Advance Timing on All Hondas and Chinese OHVs. Available in 2, 4, 6, 8, and 12 Degrees.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits GX120 to GX200, 6.5 Chinese OHVs, and 212 Predators
|
Use to Clamp RLV Mufflers to Pipes. Fits All 1" Mufflers.
|
Replacement Keepers for Aluminum Retainers for 6.5mm Valves
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits 212 Hemi Predators
|
Aftermarket Gasket Kit for 212 Predators
|
Air Filter, Race, Open Element (K&N Type). Use with Most 2-5/16" Air Filter Adapters. 3.5" x 4" (2-7/16" Opening), Angled. Minimum Qty of 50
|
|
|
|
|
|
|
|
|
|
|
|
|
GX200, 6.5 Chinese OHVs, & 212 Predators Using Stainless Valves (also GX120 & GX160s). Used to Correct Valve Train Geometry (Required with Roller Rockers).
|
Aftermarket Gasket Kit for Yellow & Red Chinese OHVs with 4-Bolt Valve Covers
|
Air Filter, Race, Open Element (K&N Type). Use with Most 2-5/16" Air Filter Adapters. 3.5" x 4" (2-7/16" Opening), Angled.
|
|
|
|
|
|
|
|
|
|
|
|
|
3/16" Chrome Moly Pushrods for GX200s, 212 Predators, & BSP "Clones". Use with All HD Springs. Capable of 10,000+ RPM.
|
1/4" Chrome Moly Pushrods for GX270s, GX390s, 420s, and 460s. Use with All HD Springs. Capable of 10,000+ RPM.
|
Stamped 1.3 Ratio Rocker Arms. Fits GX200s, 6.5 OHV, & BSP "Clones".
|
|
|
|
|
|
|
|
|
|
|
|
|
70mm Flat Top, Standard Bore, Standard Compression Height. Includes Rings.
|
Our Best Flowing and Best Selling. Fits GX200s, 212 Predators, & 6.5 BSP "Clones".
|
Designed for the GX340/390 Stock Carburetor. Can Be Used with or without an Air Filter.
|
|
|
|
|
|
|
|
|
|
|
|
|
For GX160 and GX200 Standard Bores, the Best and Easiest Compressor to Use!
|
CHAMPION Steel Shaft Mount Rockers. 1:1 Ratio. Best Rocker for the buck! Fits GX200s, BSP "Clones", & 212 Old Style Predators.
|
CHAMPION (New Style) Steel Shaft Mount Rockers. 1:1 Ratio. Best Rocker for the Buck! Fits GX200s, BSP "Clones", and 212 Old Style Predators.
|
|
|
|
|
|
|
|
|
|
|
|
|
CHAMPION Steel Shaft Mount Rockers. 1:1 Ratio. Best Rocker for the Buck! Fits GX390s & 420 OHVs.
|
Valve Cover Spacer, Allows Roller Rockers to Clear Valve Cover Baffle.
|
Valve Cover Spacer, Allows Roller Rockers to Clear Valve Cover Baffle.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits GX240 to GX390s and 11-16hp Chinese OHVs
|
#35 RLV Xtreme High Performance Kart Chain "Gold on Gold" Box, 120 Link Long
|
CNC Machined from 1/8" Aluminum Plate. All Parts for Throttle Mechanism That Do Not Come with an Engine Are Included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Special Mini Bike Pipe that Exits between Tire and Frame. Fits Most "Old School" Mini Bikes.
|
High Performance 3 Stage Mini Bike Header with Improved Flange-To-Pipe Transition. Pipe Exits between Tire and Frame. Fits Most “Old School” Mini Bikes.
|
1-5/16" Round Hole, 3-Baffle Muffler for Use on Most Kart Pipes
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows for an Easy, Fool-Proof Way to Mount Larger 4-7.5 HP Engines in a Doodle Bug, Baja, Motovox, Most Mini Bikes, and Other Custom Applications
|
This Lightweight Design Allows for an Easy, Fool-Proof Way to Mount Larger 4-7.5HP Engines in a Doodle Bug, Baja, Motovox, Most Mini Bikes, and Other Custom Applications.
|
Special Economy Ground 252 Lift Camshaft for Mini Bikes, Dirt Racers, Snow Mobiles, and Other Applications Requiring Wide Power Bands. Pulls Hard from 2000 to 6500 RPM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Approximately .272” Lift and 245 Degrees Duration (At .050). Ground and Hardened High-Performance Camshaft Designed for Wide Power Band with Awesome Increases in Mid-Range Power.
|
Quality Billet Valve cover for 212 Hemi Predators.
|
High-Quality Billet Valve Cover for GX200s and 6.5 Clones
|
|
|
|
|
|
|
|
|
|
|
|
|
High-Performance Grind for Significant Power Increase over Stock Cam at an Economical Price. Stock Lift with Increased Duration and Optimized Valve Timing.
|
High-Quality Lightweight Billet Valve Cover for Big Block Hondas and 13/15hp Chinese OHV. Extra Tall to Clear Roller Rockers.
|
Cast Aluminum Flywheel by PVL. Safety and Performance at an Affordable Price. AKRA & WKA Approved!
|
|
|
|
|
|
|
|
|
|
|
|
|
Billet Steel Roller Tip Rocker Arms for GX200 and BSP "Clones". 1.2 or 1.3 Ratio.
|
Billet Steel Roller Rockers for the 212 Hemi Head, Manufactured by NR Racing. 1.2 or 1.3 Ratio.
|
Billet Aluminum Flywheel, 3lbs. 7oz., Nonadjustable Timing. Works with Stock Recoil. Timing Set at 32 BTDC.
|
|
|
|
|
|
|
|
|
|
|
|
|
Billet Aluminum Flywheel, 3lbs. 7oz, Nonadjustable Timing. Works with Stock Recoil. Timing Set at 32 BTDC.
|
Billet Flywheel, Fits GX390 and 13 HP Chinese OHV. Uses Stock Honda Coil.
|
Black Venom Aluminum Full Roller Rocker Arms with Bearing for GX200s and BSP "Clones". Choice of Ratio.
|
|
|
|
|
|
|
|
|
Billet Flywheel to Fit GX390s and 13 HP Chinese OHVs. Uses Stock Honda Coil. Works with Both Electric and Recoil Start Engines. 4.2lbs. Timing Set at Stock. 6-Degree Key Recommended.
|
|