|
|
|
|
|
|
|
|
|
|
|
|
|
An Inexpensive Way to Lap Valves!
|
Fits GX270s, GX390s, and Most Clone 13/15HPs and 420s
|
Replacement Blades for Neway Cutters
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Honda Valve Guide Driver, 5.5mm
|
30 and 60 Degree Cutters to Convert Single Angle to Three Angle Kit
|
Use in Drill to Lap Valves, the Easiest and Quickest Way!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use in Drill to Lap Valves, the Easiest and Quickest Way!
|
Handheld Compressor for Installing Heavy Valve Springs on Honda Heads. Fits GX200 and 6.5 OHV.
|
Quickly Measure Clutch Spring Height
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A Simple, Hands-Free Way to Compress Your Valve Springs. Works on GX200s, 6.5 OHVs, GX390s, and 13 HP OHVs.
|
Gauge for Checking Valve Guides to Honda Specs
|
Turn Cutters Continuously and Improves Control of Material Removal. Includes Drive Adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes Reamer, Driver, GO/NO-GO Gauge, and Hone. Choice of Tapered or Straight Reamer.
|
Includes 45-Degree Cutter, Case, Pilot, T-Handle, and Tool Kit. Fits 19-32mm Valves with 5.5mm Stem.
|
Includes 45-Degree Cutter, Case, Pilot, T-Handle, and Tool Kit. Fits 19-32mm Valves with 5.0mm Stem.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
30 and 60-Degree Cutters to Convert a Single-Angle Kit to a Three-Angle
|
Used for Cutting Spring Seats for Dual Springs and/or Increasing Spring Installed Height
|
Includes Cutters 30/46/60, Case, Pilot, T-Handle, and Tool Kit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes 30, 45, and 60 degree cutters; Case; Pilot; T-Handle; and Tool Kit. Fits 19-32mm Valves (5.0mm stem)
|
Includes 30, 45, and 60 degree cutters; Case; Pilot; T-Handle; and Tool Kit. Fits 19-32mm Valves (5.5mm stem)
|
An Efficient Tool for Refacing Valves by Hand
|
|
|
